Device error messages
Verifone tamper message (TAMPER, tamper detected): what it means and what to do
A Verifone terminal showing TAMPER or a tamper error has locked itself to protect card data. It cannot be cleared on site. Stop using it and contact support.
- Applies to
- Verifone P400, P200, M400, V400c, V400m
- Last reviewed
- Oct 27, 2026 by Abdul Rashid
Exact messages this covers
*TAMPER*
Check first
- What exactly does the screen say? Take a photo of it.
- Which model is it, and what is the serial number on the label on the back?
- Was the unit recently dropped, exposed to liquid, hit by a power surge, or moved?
- Do you see any sign of interference: a damaged tamper-evident label, wires sticking out, or something inserted in the card slots?
A tamper message on a Verifone terminal (on screen as TAMPER, tamper detected, a tamper alert or similar) means the device has detected a possible security breach and has locked itself to protect card data. It cannot be cleared at the counter: restarting or unplugging will not fix it. Stop using the device and contact support.
This applies to Verifone Engage devices such as the P400, P200, M400, V400c and V400m.
Before you start
- Why it happens: Verifone lists physical causes such as a power surge, a drop, a liquid spill, loose internal parts or other damage. It also triggers when someone opens the case or tries to fit a skimmer.
- Why you cannot fix it on site: the terminal locks itself to protect card data, and Verifone says a tamper error cannot be fixed on site; its support pages say the terminal must be replaced. Verifone devices have a tamper-evident case and no user-serviceable parts.
- Payments stop on this unit: Verifone's platform documentation says a tamper state is only cleared by reloading the security keys with a trusted key-loading device, which is not something a merchant can do. Plan on using another terminal until support resolves it.
Steps
- Stop taking payments on the device and move customers to another terminal or payment method. Expected: no more cards go to the tampered device. It will not take payments in this state anyway.
- Leave it alone. Do not restart it repeatedly, open it, unplug cables to test it, or try menus or passwords to clear the message. Expected: the device stays as it is. A restart will not clear a tamper.
- Take a photo of the screen and write down the model and serial number from the label on the back. Expected: you have the exact message, model and serial number for support.
- Look over the outside without opening anything: the tamper-evident label, the card slots and the cables. Expected: nothing unusual, or a note of what you saw. If you find a foreign object, extra wires or a broken label, keep the device untouched for investigation and tell your security contact.
- Contact Allstar support with the model, serial number, payment application, processor, the photo and anything you noticed. Expected: support confirms the tamper and gives you the next step for a return or replacement.
- Unplug the device and store it somewhere safe, in its original packing if you still have it, until support sends return instructions. Expected: the unit is secured and ready to ship back.
If that did not work
There is no on-site fix for a tamper message, so there is nothing further to try at the counter. If the message disappeared after a restart, still report it to support: the device logged a security event and should be checked before it takes more cards.
Be wary of anyone who calls offering to "unlock" the terminal or asks you to enter codes or open the device. Contact Allstar support directly at 888-403-7066 or support@allstarterminals.com, Monday to Friday, 9 AM to 5 PM Central, with the model, serial number, payment application, processor and the exact message on screen.
Sources
- Verifone US Support: Tamper Errors
- Verifone Nordics Support: P400 Tamper
- Verifone Nordics Support: V400c Tamper
- Verifone Nordics Support: V400M Tamper
- P200 Installation Guide: Service and Support
- P400/P400 Plus Installation Guide: Device Setup (DOC435-003-EN-C rev C02)
- Verifone ADK OS platform: Diagnose and troubleshooting
- P400 PIN pad implementation guide: Troubleshooting
Stop and contact support if
- Any tamper or security message: stop, do not reboot repeatedly, contact support. There is no on-site fix.
- Signs of a skimmer or physical interference (foreign object in a card slot, extra wires, broken tamper label): do not use or handle the device further; keep it for investigation and contact support and your security contact.
- Anyone, including a caller claiming to be support, asks you to open the device, enter codes or follow steps to clear the tamper: refuse and contact Allstar support directly.
Contact Allstar support with the model, serial number, payment application, processor and the exact message on screen.
Notes
- The exact string "Tamper Maintenance Required" was not found in any Verifone-hosted document. It appears in searches and may come from a specific payment application or firmware. Verifone's own pages say tamper, tamper error, tamper detected or tamper alert; the P200 guide shows *TAMPER*. Ask the owner whether support has seen the exact wording and on which model.
- Verifone's US page says a tampered device must be replaced; the Nordic pages say the same. Whether Allstar can send a tampered unit for repair and re-injection, or replaces it, and under what warranty terms, is an owner decision. The guide promises neither.
- Verifone lists physical causes: power surge, drop, liquid spill, loose internal parts, physical damage. Verifone Central also describes soft tampers (for example invalid keys), not cited here.
- No steps to clear a tamper are given, by rule. The key-reload statement comes from Verifone ADK OS (VOS3) platform docs; the page does not name Engage models, so it is stated generally.
Sources
- Verifone US Support: Tamper Errors · read 2026-10-26 · manufacturer documentation
- Verifone Nordics Support: P400 Tamper · read 2026-10-26 · manufacturer documentation
- Verifone Nordics Support: V400c Tamper · read 2026-10-26 · manufacturer documentation
- Verifone Nordics Support: V400M Tamper · read 2026-10-26 · manufacturer documentation
- P200 Installation Guide: Service and Support (*TAMPER* on-screen message) · read 2026-10-26 · manufacturer documentation
- P400/P400 Plus Installation Guide: Device Setup (tamper-evident label, periodic inspection) · DOC435-003-EN-C, revision C02 · read 2026-10-26 · manufacturer documentation
- Verifone ADK OS platform: Diagnose and troubleshooting (tamper handling) · read 2026-10-26 · manufacturer documentation
- P400 Petro PIN pad implementation guide: Troubleshooting (tamper-evident case, no user-serviceable parts) · read 2026-10-26 · manufacturer documentation
Was this guide helpful?
Thanks. The team reviews this feedback.
