Getting started

Dejavoo P1 setup: power, Ethernet, paper size and TPN download

Set up a Dejavoo P1 Android countertop terminal: power adapter, Ethernet and static IP, the 58 mm paper roll it takes, and how DvPayLite downloads its TPN.

Applies to
Dejavoo P1
Payment application
Dejavoo DvPayLite (iPOSpays)
Last reviewed
Oct 27, 2026 by Abdul Rashid

Ask Allstar AI about this guide

Exact messages this covers

  • UPGRADE APP
  • Installing, please wait…
  • Parameter initialization completed successfully.

Check first

  • Will the terminal use Ethernet or Wi-Fi?
  • Does the screen show the SALE screen (ready) or the UPGRADE APP screen (not yet loaded)?
  • Did your provider change settings in the iPOSpays portal that the terminal has not picked up?

To set up a Dejavoo P1, plug in the 5 V 2 A adapter, connect Ethernet after the terminal powers on (or use Wi-Fi), load a 58 mm thermal roll, and confirm DvPayLite opens the SALE screen. If it shows UPGRADE APP instead, it needs its TPN downloaded first.

Before you start

  • The P1 is Dejavoo's Android countertop terminal: 5 in touchscreen, Ethernet (RJ45), dual-band Wi-Fi (2.4 and 5 GHz), Bluetooth, built-in 2 in thermal printer.
  • Paper: thermal, 58 mm wide, 40 mm roll diameter.
  • Power: 5 V 2 A adapter with a USB-A to USB-C cable (both in the box). The P1 also has a 7.2 V 2600 mAh battery.
  • Terminals Allstar programs arrive with the TPN already downloaded, so steps 3 and 4 are usually not needed.

Steps

  1. Connect the 5 V 2 A adapter with the supplied USB-C cable and plug it in. If the screen stays dark, hold the side Power key. Expected: the P1 boots and opens the Dejavoo payment app.
  2. For Ethernet, power the terminal on first, then plug in the Ethernet cable. Expected: the Ethernet icon appears at the top right of DvPayLite.
  3. Only if your network needs a fixed address: DvPayLite > Ethernet icon > Configure > Ethernet > Setting Ethernet > Use static settings. Enter the IP address, gateway, subnet mask and DNS, then save. Expected: the terminal reconnects with the static address.
  4. If you see UPGRADE APP: enter the TPN in the TPN # field, tap Download App, enter the one-time passcode if asked, wait for Installing, please wait, and tap Yes to any settings update. Expected: the SALE screen opens.
  5. After portal changes: Favorites star > UPGRADE APP > check the TPN > Download Parameter. Expected: Parameter initialization completed successfully. Tap OK.
  6. Check the idle screen: a blinking Wi-Fi icon means not connected, steady means connected. To restart, hold the side button and tap Reboot. Expected: the terminal is online and ready for a test sale.

If that did not work

  • No Ethernet connection with a static IP: Dejavoo's checks are that the IP is on the same network as the gateway, is not used by another device, the subnet mask and gateway match your network, and the cable is seated. If your network uses DHCP reservations, ask your network administrator.
  • Settings screen asks for an administrator password: stop and contact support.
  • Nothing prints: confirm the roll is thermal, 58 mm wide, and no larger than 40 mm across. Dejavoo does not publish P1 paper-loading steps; contact support if the printer still does not feed.

Contact Allstar support with the model, serial number, payment application, processor and the exact message on screen.

Sources

Stop and contact support if

  • The terminal asks for an administrator or manager password you do not have: stop and contact Allstar support or your provider. Do not guess.
  • You do not have a TPN or the download fails: contact Allstar support. Terminals Allstar programs arrive with the TPN already loaded.
  • Any tamper or security alert on screen: stop, do not reboot repeatedly, contact Allstar support.

Contact Allstar support with the model, serial number, payment application, processor and the exact message on screen.

Contact support about this

Notes

  • Dejavoo publishes no P1 paper-loading procedure and no P1 Wi-Fi setup steps. Paper size comes from the flyer (58 mm wide, 40 mm roll). Wi-Fi setup is not covered here; contact support.
  • Dejavoo does not document how to power on the P1. Holding the side Power key is the general Android behaviour, not a Dejavoo instruction.
  • The static IP and TPN articles are written for Dejavoo terminals in general (the static IP article lists the P1 by name). Screens may vary with the Android and DvPayLite version.
  • The one-time passcode for a TPN download comes from the provider's iPOSpays portal; merchants normally do not have it.

Sources

Was this guide helpful?

More P1 guides