Getting started

How to restart a PAX terminal (A920, A920 Pro, A80, A35, A77): power off, reboot and frozen screens

Restart or power off a PAX A920, A920 Pro, A80, A35 or A77, recover a frozen terminal, and set the daily reboot time. Factory resets go to support.

Applies to
PAX A920, A920 Pro, A920Pro Duo, A80, A35, A77
Last reviewed
Oct 27, 2026 by Abdul Rashid

Ask Allstar AI about this guide

Check first

  • Which model is it? The power button works differently on each.
  • Is the screen frozen, or does the terminal respond but behave oddly?
  • Does it restart by itself at about the same time every day? That is the PCI security reboot, not a fault.
  • Has anyone suggested a factory reset? Do not do it: it wipes the encryption keys.

To restart a PAX A920 or A920 Pro, hold the power button for 3 to 5 seconds to turn it off, then hold it again for 3 to 5 seconds to turn it back on. The A80 uses a two-second press of ON/OFF, the A77 and A920Pro Duo show a shutdown menu, and the A35 PIN pad resets when you hold X and O together for 5 to 8 seconds. Never factory reset a terminal yourself: it wipes the encryption keys.

Before you start

  • Finish or cancel any transaction in progress.
  • Know the model. It is printed on the label on the back.
  • A terminal that restarts by itself once a day is doing a PCI security reboot. That is normal and cannot be turned off, but its time can be moved (step 6).

Steps

  1. A920 and A920 Pro: hold the power button 3 to 5 seconds and release, confirming on screen if asked. A920Pro Duo: hold 3 seconds, then tap Power Off in the shutdown menu. A77: hold 3 to 5 seconds, then tap Shutdown. Expected: the terminal shows it is shutting down and the screen goes dark.
  2. A80: press ON/OFF for about two seconds. Expected: the display goes off.
  3. A35: hold X and O together for 5 to 8 seconds. If nothing happens, unplug its power (adapter on the communication cable, or the Powered USB cable), wait 10 seconds, plug it back in. Expected: the A35 restarts to its idle screen.
  4. Power back on: A920, A920 Pro and A77 hold the power button 3 to 5 seconds; A920Pro Duo hold it 5 seconds; A80 press ON/OFF for two seconds. Expected: the terminal boots to the home screen or payment app.
  5. A920 or A920 Pro completely frozen: open the battery cover, take the battery out, put it back, close the cover and power on. Expected: normal boot.
  6. Daily restart during business hours: open Android Settings (see the PAX settings password guide), go to Security & Location > Scheduled Time Reboot, switch it on and pick a time outside trading hours. Expected: the reboot moves to the time you chose.

If that did not work

If the terminal keeps rebooting, will not finish booting, or asks for a screen-lock password nobody knows, contact Allstar support. Do not factory reset it. A factory reset erases the encryption keys and the payment app, so the terminal has to be re-injected and reprogrammed before it can take cards again. Any tamper or security message: stop, do not reboot repeatedly, contact support.

Contact Allstar support with the model, serial number, payment application, processor and the exact message on screen.

Sources

Stop and contact support if

  • Factory reset: do not do it. On an injected terminal it erases the encryption keys and the payment app, and the terminal must be re-injected before it can take cards. Contact Allstar support.
  • The terminal asks for a password or PIN right after it boots and nobody knows it: contact Allstar support. PAX handles this with a factory reset at a repair center.
  • It keeps rebooting over and over, or will not finish booting: stop. Contact Allstar support.
  • Any tamper or security message such as 'Ped Tampered' or 'Terminal Be Attacked': stop, do not reboot repeatedly, contact support.
  • Battery looks swollen or the case is bulging: stop using it and contact support.

Contact Allstar support (support@allstarterminals.com, 888-403-7066, Monday to Friday 9 AM to 5 PM Central) with the model, serial number, payment application, processor and the exact message on screen.

Contact support about this

Notes

  • No PAX quick setup guide describes a Restart option. Restart here means power off, then power on. Newer Android builds may also show Restart in the power menu; PAX does not document it.
  • The A920 and A920 Pro guides give the same 3 to 5 second hold for power on and power off and name no on-screen confirmation; the A920Pro Duo and A77 guides do name a shutdown menu.
  • The A35 guide calls the X + O hold an 'Operating System Reset' and does not say how it differs from a power cycle. Unplugging power as a fallback is inferred from the guide's description of how the A35 is powered (unverified, inference).
  • The frozen-terminal battery pull comes from PAX's A920 FAQ. PAX does not say whether it applies to other models; the A80 and A35 have no user-removable battery.
  • Scheduled Time Reboot sits behind the Android Settings password; the path is from PAX's Reboots every 24 hours page and only appears on firmware that has the feature. It can also be set by the ISO in PAXSTORE.

Sources

Was this guide helpful?

More A920 guides