Connectivity
- Dejavoo Z8 / Z11: Ethernet setup (DHCP or static IP)Where the Ethernet mode (DHCP or static IP) lives on a Dejavoo Z-series terminal and how to switch it or enter static parameters.
- Dejavoo Z8 / Z9 / Z11: connect to Wi-FiMenu path to scan for a Wi-Fi network, enter the password and connect a Dejavoo Z8, Z9 or Z11, with the network requirements Dejavoo sets.
- Ingenico Lane series: terminal shows nothing or will not link to the POSIngenico's own isolation steps for a Lane PIN pad that is dark, unresponsive or not talking to the register: check the rear connector, restart, swap units, power-cycle the host, and confirm the power source. Screen prompts such as a waiting-for-connection message come from the payment application and are not covered by Ingenico's guides.
- Ingenico Move/5000: Wi-Fi, Bluetooth and 4G options, SIM installation and base connectionsWhich radios a Move/5000 can have (4G/3G with dual SIM, Wi-Fi 2.4 and 5 GHz, Bluetooth), where the SIM cards go and how to fit them, and what the base can add (Ethernet, modem, Bluetooth). Network names, passwords and APNs are set in the payment application, not in Ingenico's hardware guide.
- PAX A920 / A920 Pro: Wi-Fi will not connect or keeps droppingWhat to check when a PAX A920 or A920 Pro cannot join Wi-Fi, loses the connection during the day, or shows Wi-Fi but transactions fail: credentials, coverage, channel conflicts, DHCP versus static IP, and the ping test.
- Valor VL100 / VL100 Pro / VL110 / VP100: connect to Wi-Fi, Ethernet or 4GFirst-boot and Comm Config steps to put a Valor VL100, VL100 Pro, VL110 or VP100 on Wi-Fi, Ethernet or (VL110) cellular, and how to switch connection types.
- Verifone V400m: connection options and cabling the Full-Function BaseWhich networks a Verifone V400m can use (Wi-Fi, Bluetooth, 3G or 4G, and Ethernet or phone line through the Full-Function Base), where the SIM goes, and how to cable the base.