Power and charging
- How to restart an Ingenico card reader (Lane, Desk, Move, Link)Restart or reset a frozen Ingenico card reader: the yellow + dot key combination, the power-cycle method for each model, and when to stop and call support.
- Ingenico Lane/3000 reset: how to restart or reboot the PIN padHow to reset, reboot or restart an Ingenico Lane/3000 PIN pad: the key combination, the power-cycle method for wall, PoE and USB power, and when to call support.
- Ingenico Lane/7000 and Lane/8000 reset: how to restart the PIN padHow to reset or restart a frozen Ingenico Lane/7000 or Lane/8000: the key combination, power-cycling on wall, PoE or USB power, and when to call support.
- Ingenico Link/2500: turn on, turn off, restart and chargeHow to turn the Ingenico Link/2500 on and off, restart it, and charge its battery over USB-C, with Ingenico's checks when it will not power on.
- Ingenico Move/5000: install the battery, charge it, and use the baseThe Move/5000 ships with its battery disconnected. This guide gives Ingenico's steps to fit the battery, charge it on the base or with the direct 5 V supply, what the charging icon looks like, charge times (50% in about 1.5 h, full in about 4 h), and the checks when the terminal will not turn on.
- Ingenico Move/5000: how to turn off, turn on and restartHow to turn off, turn on and restart an Ingenico Move/5000 wireless terminal, plus Ingenico's checks when it will not switch on.
- PAX A920 / A920 Pro: battery will not charge, stops at 80%, or runs flat too fastWhy a PAX A920 or A920 Pro will not charge or power on, why an A920 Pro stops charging at 80% (Battery Management System), what the red taskbar and the battery-with-exclamation symbol mean, and when the battery needs replacing.
- Verifone V400m: install the battery, charge, and power on for the first timeHow to fit the battery, charge a Verifone V400m with the power pack or the charging base, and what to expect on the first boot.